Our design philosophy is to simply eliminate coloration from cable itself. We never load it with character to
create seemingly impressive sound, therefore avoid utilizing any special material, particular configuration nor
special treatment to add some impressive feature. We passionately care for fundamental quality and spare no effort
to realize it, but we believe it should always sound natural as if the cable does not exist.
SL110XX; is Balanced 2-core Interconnect Cable, terminated with XLR plugs, usable for both Analogue and Digital
AES/EBU) with 110 ohm impedance.
Conductor
High purity Oxygen-Free-Copper, extensively annealed in low temperature to rectify mechanical distortion/stress
from extrusion process for smoother signal transport, due to its uniformed internal structure.
Insulation:
Two layers of polymer polyolefin of different mass to suppress resonance more effectively. Polyolefin is the best
insulator with property of low dielectric constant (1/4 to PVC), therefore coloration factor is minimized. We
also developed a method to realize tight contact between conductor and insulator in order to eliminate random gap
thus minimized strain distortion between conductors.
Tube Core Structure:
Conductor is wrapped spirally around 0.5mm dia. core tube, and covered with resonation absorbing cross-linked
polyethylene insulator; for low distortion and minimum loss of information. And having air space internally,
dielectric constant factor and electrostatic capacitance are further lowered.
Air Damper Tube:
onductive core is equipped with two polyethylene tubes on each side which act as dampers for the resonating
conductor, releasing unwanted resonance into air space.
Copper Foil Shielding
Copper foil can shut out exogenous R/F noise completely, also very effective against low frequency noise far
more than, usual copper mesh or aluminum foil.
